Hygienic measurement instrumentation are designed for use by the food, drink and pharmaceutical industries, which require a high level of cleanliness in their manufacturing processes.
Measurement & Instrumentation Guides
Guidance and reference articles for sourcing, setting up and using measurement equipment.
Wet/Dry
Wet/Dry describes a dp measurement device for use with a liquid on the positive pressure side and a dry/non-condensing gas on the negative pressure side.
Wet/Wet
Wet/Wet describes a differential pressure measurement device which is compatible with liquid on both the positive and negative side process connections.
Wetted Parts
Wetted Parts are the measurement side components of a sensing device which are in contact with the liquid media to be measured.
Oxygen Service
Select Oxygen service measurement products to use in atmosphere which contains high levels of Oxygen or measure gas containing high concentrations of O2
Isolation Diaphragm
An Isolation diaphragm is a thin membrane which is used to isolate the media on one side of a diaphragm from media on the other side.
Flush Diaphragm
A guide to flush diaphragm pressure & level measurement instrumentation, including explanations, applications and a choice of products with flush process fittings.
Dry/Dry
Dry/Dry describes a differential pressure measurement device which is only compatible with dry/non-condensing gas on both the positive and negative pressure side.
Dry Cell
Pressure sensing technology which excludes any fluid filled components. The advantages of a dry cell pressure sensor are: More sensitive and responsive to measuring low pressures No risk of oil contamination if the containment isolation diaphragm fails. Compact size Lower cost of manufacture
Food Grade
Food grade products and substances are designed to be safe when used inside equipment and processes which are used in the production of food, pharmaceuticals and drink. Food grade products and substances prevent contaminant substances from entering the food manufacturing process which could cause physiological harm.
M10 x 1
This is a metric fine thread with a outer diameter of 10 millimetres and a thread pitch of 1 millimetre.
Process Connections
Find answers to questions about process connections used to install measurement instrumentation.
Why do you have to select an elastomer seal material for some types of pressure sensor?
When selecting pressure sensor options, occasionally you will come across a choice of seal materials to choose depending on the sensor design. An all welded construction provides a high integrity and homogeneous material design. The main disadvantages of this kind of sensor design is the lack of flexibility to customise for different applications, induced measurement […]